INSTRUCTIONS
Page 4 of 4
Product: ALL
Document #: 90213
Process: Plexus PC- 120 Application Instructions
Rev.: 1
Remember these points! To avoid problems with Plexus PC-120:
•
Don’t use too much PC-120. Only a thin layer is needed.
•
Use a clean rag to wipe PC-120 off before it completely dries to remove surface contaminants it
has cleaned. Good quality paper towels are a better choice to minimize introduction of
contaminates to surface.
•
Any sign of corrosion already on the surface should be removed by abrading BEFORE priming.
•
Check the lot number for the date to make sure the PC-120 is less than a year old.
Questions
•
Please contact Plexus Technical Service at 1-800-851-6692 or [email protected]