Seagull Models P-26A PEASHOOTER, Инструкция по сборке

Страница: 19 / 38

19
Attach the muffler to the engine using
the hardware included with the muffler.
Cut the head of fuselage to fit over the
muffler and exhaust stacks. Work slowly
for the best results.
Reinstall the servo horn by sliding the
connector over the pushrod wire. Cent-
er the throttle stick and trim and install
the servo horn perpendiular to the servo
center line.
Move the throttle stick to the closed po-
sition and move the carburetor to closed.
Use a 2.5mm hex wrench to tighten the
screw that secures the throttle pushrod
wire. Make sure to use threadlock on the
screw so it does not vibrate loose.
Ignition Module.