Seagull Models Husky, Инструкция по сборке

Страница: 25 / 32

25
www.seagullmodels.com
INSTALLING BATTERY-RECEIVER.
1) Plug the five servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
APPLY THE DECALS.
1) If all the decals are precut and ready to
stick. Please be certain the model is clean and
free from oily fingerprints and dust. Position
decal on the model where desired, using the
photos on the box and aid in their location.
2) If all the decals are not precut, please use
scissors or a sharp hobby knife to cut the
decals from the sheet. Please be certain the
model is clean and free from oily fingerprints
and dust. Position decal on the model where
desired, using the photos on the box and aid
in their location.
Recomend Wrapping Receiver in Plastic Bag
or Baloon if flying off water.
Receiver.
Battery.
Wing tube.
Attach the aluminium tube into fuselage.
ATTACHMENT WING- FUSELAGE.
Epoxy