Rev.1.2 – 7.2018.EL950.1.3.1086C
57
Figure 22 – Bill Validato
Removing Bill Validator
From time to time it may be necessary to remove the Bill Validator for cleaning and clearing jams.
1. To remove the Bill Validator
a. Disconnect the power to the machine – this is very important to avoid damaging not
only the bill validator but your VMC. Failure to disconnect power before performing
this operation will void your warranty.
b. Unlock and open the Front Door
c. Push Bill Validator Tab forward and slide Bill Storage Box up to remove
d. Disconnect Bill Validator from Wire Harness
e. Remove the Four (4) Mounting Nuts.
Tab
Bill Collection Box
(4) Mounting Nuts
Lower Housing
Tab
