Page 8 of 17
2.
Using #10 x 7/8” pan-head Phillips screws,
attach bracket to cabinet. Repeat for other
bracket.
3.
Turn the adjustment bolt for each bracket until
the bolt touches the wall.
4.
Turn the locking nut on adjustment bolt to lock
in positions.
Complete Installation
1.
Insert seal behind the top of the lower window
sash and against the glass of the upper
window.
2.
Place one window-lock bracket on top of lower
window and against upper window sash on
each side of window.
3.
Use a 3/32” drill bit to drill starter holes through
the holes in each bracket into the window sash.
4.
Attach both window-lock brackets to window
sash with a #10 x ¾” round-head screw to
secure window in place.
Final Installation
NOTE:
1.
Make sure the free end of the ground wire is
outside of the cabinet.
2. Insert air conditioner into cabinet.
3. Connect green ground wire to cabinet base
with ground screw. Position ground wire
pointing straight up. Put excess ground wire
between coil and air conditioner cabinet.
4. Push Front panel straight on and then lower it
slightly to lock it into place.
5. Using 2 # 10 x 3/8” round head screws, attach
bottom of front panel.
