Page 7 of 17
Install Cabinet into Window
•
Handle air conditioner gently.
•
Be sure your air conditioner cabinet does
not fall out of the opening during
installation or removal.
•
The place where the power cord exits the
air conditioner should be no more than 4 ft
(122 cm) from a grounded 3 prong outlet.
•
Do not block the louvers on the front panel.
•
Do not block the louvers on the outside of
the air conditioner.
1.
Center empty cabinet in window. Check
that lower rail of air conditioner cabinet is
behind and against back side of windowsill.
Maintain a firm hold on the air conditioner
cabinet. Lower window sash to hold
cabinet in place.
2.
Measure the distance between the right-
hand side of the cabinet and the inside of
the window channel.
3.
Repeat for the left side. Adjust the cabinet
until the distance on each side is the same.
4.
use a 3/16” drill bit to drill 4 starter holes
3/8” deep- through the 4 holes in the
cabinet and into the windowsill.
5.
Attach cabinet to windowsill with 4 - # 10 x
½” pan-head Phillips screws.
6.
Check that air conditioner cabinet is tilted
to the outside so that water will run to the
outside.
Attach Side Curtains to Window Frame
1. Pull Left-hand curtain out until it fits into window
channel. Use a 3/32” drill bit to drill a starter hole
through the hole in the curtain housing and into the
lower window sash.
2. Insert one of the #10 x ¾” round-head screws
through the threaded hole in the top of the curtain.
3. Repeat for right-hand curtain.
Attach support Brackets
1.
Attach support brackets to the cabinet by aligning
the holes in the bracket with the holes in the
cabinet.
