Page 3 of 17
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic
precautions:
•
Plug into a grounded 3 prong outlet.
•
Do not remove ground prong.
•
Do not use an adapter.
•
Do not use an extension cord.
•
Unplug
Air
Conditioner before servicing.
•
Use two or more people to move and install air
conditioner.
___________________________________________________________________________________________
INSTALLATION REQUIREMENTS
________________________________________
Tools and Parts
Gather the required tools and parts before starting
installation.
Read and follow the instructions provided with any
tools listed here.
Tools Needed:
Flat-blade and Phillips Screwdrivers
Tape measure
Drill and 3/16” or smaller bit
Level
Parts supplied (on some models)
NOTE:
Installation parts are supplied for double-
hung windows up to 40: (101.6cm) wide.
________________________________________
Location Requirements
IMPORTANT:
Observe all governing codes and
ordinances.
Check the location where air conditioner will be
installed. Proper installation is your responsibility.
Make sure you have everything necessary for
correct installation.
The location should provide:
•
Grounded electrical outlet within 4 ft (122
cm) of where the power cord exits the air
conditioner.
NOTE:
Do not use an extension cord.
•
Free movement of air in room to be cooled.
•
A large enough opening for the air
conditioner.
•
Adequate wall support for weight of air
conditioner. Air conditioner weights
between 145 and 200 lbs (65 to 96 kg).
NOTE:
Cabinet louvers must not be obstructed.
Air must be able to pass freely through the
cabinet louvers.
