1
2
E-10
Attaching and Detaching the Port (option)
Release the port lock on the
RDX housing (front case) by
sliding it in the direction of
the arrow as shown in the
diagram, and rotate the port
mount ring toward OPEN (in a
counterclockwise direction)
until it stops
Align the convex part of the
Port with the concave part of
the port mount ring,
and fully insert the
port into the housing
Attaching the port
In order to use this product underwater, the optional port (option) for the
camera lens must be attached to this product.
Port lock
CAUTION
Only the optional ports designed for SEA&SEA RDX-series housings can
be attached to this product.
This product is delivered with a housing body cap attached to the port mount.
Make sure to remove the housing body cap when attaching the port.
The housing body cap has no watertight capability.
When attaching the port to the housing, always refer to the instruction
manual provided.
Convex part
Concave
part
Convex part
Concave part
CAUTION
Before attaching the port, make sure there are no specks of dust, scratches,
or deformities on the O-ring and the O-ring contact surfaces.
Slide
