background image

E-17

This product accepts SEA&SEA optional accessories. By using 

this product in combination with those accessories, you will be able 

to try various shooting techniques.

Attaching the Optional Accessories

Finder

This product comes equipped with a 0.5x pick-up finder.  The finder can 

be replaced with an optional finder so you can change the finder magnifi-

cation to match your shooting conditions.

CAUTION

Lenses, strobes and other accessories have different depth rating. Check 

the depth rating for each before use.

Read the instruction manual for each accessory before use.

1

2

CAUTION

Replacing the pick-up finder

Rotate the finder unit mounted on 

the rear case in a counterclockwise 

direction to remove it

The screw areas are coated in 

grease, so be careful not to touch 

them. 

Rotate the replacement finder 

unit in a clockwise direction to 

attach it

Before attaching the finder, check to make sure that there is no dust, dirt, 

or debris inside it. 

When replacing the finder, do not touch the surface of the finder lens.

When replacing the pick-up finder, always refer to the instruction manual 

provided.

Содержание RDX-750D























Отзывы: