SATURN-BOXER
MECHANICAL INSTALLATION
International registered trademark n. 2.777.971
16. RELEASE SYSTEM
16.1. To release procede as follows:
- Insert the key,
push
and turn about 90° clockwise (Fig. 34).
- Pull the release lever until it stops, about 90° (Fig. 35).
Note: when pulling the release lever the electronic control unit receives a stop impulse through the micro-
switch placed on the inside (if present).
16.2. To relock procede as follows:
- Push the release lever to complete closing.
- Rotate the key counter-clockwise and extract it.
Once the lock has been restored the electronic control unit is reactivated (only if a micro-switch is mounted) .
FOR SATURN
17. RELEASE SYSTEM FOR BOXER
17.1. In order to release do as follows:
-Open the lock cover, insert the key and rotate it 90° clockwise (Fig. 36).
- Pull the release lever until it stops, about 90° approximately (Fig. 37).
Note: when you pull the release lever, the electronic control unit receives a stop impulse thanks to a micro-
switch placed inside.
17.2. In order to relock do as follows:
- Push the release lever to complete closing.
- Rotate the key counter-clockwise and extract it.
- Close the protective lock cover.
Once the lock has been restored the electronic control unit reactivates
Fig. 26
Fig. 24
Page for both instaler and user
Fig. 23
s
Clo e
Open
Push and
turn
Open
Close
Fig. 25
67411165
10
REV 02 - 12/2013
