Notice: the holes for the chain tensioner and so the chain
itself must be to a minimum distance of 45 mm from the gate
(Fig. 21).
9.2.
Install the chain making it pass through the pinion group as
in Fig.18.
The chain must be always in line both vertically (Fig. 19) and
orizontally (Fig.21), if not perfectly aligned (Fig. 22 and 23) it may
derail from the pinion group or the motor reducer risks a greater
effort not allowing the right operating of the system.
9.3.
Set up a fillet chain tensioner to the two extremities of the
gate to regulate the tension of the chain.
Notice: do this last operation with the engine completely
unlocked through the special unlocking key.
ENGLISH
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
Fig. 23
Fig. 21
45 mm
Fig. 19
Fig. 22
Fig. 20
Cod. 67410014
Fig. 24
10. EXTERNAL RELEASE (OPTIONAL)
Security
box
13
REV 03 - 11/2013
