SEA ISUZU FSR Скачать руководство пользователя страница 51

Страница: 51 / 56

OWNER

’

S MANUAL

(

SEA ISUZU FSR/FSD EV)

SEA-OWS-QA-004/5

ISSUE DATE:

30/05/2020

Page

Issue Date

Sep-19

Once the charging cycle has
been completed and the battery
is fully charged (100%), the LED
at the vehicle side socket will
turn solid GREEN.

Once full charge is reached,
the SEA Drive system
automatically shuts down
to stop any residual load
on the battery systems.

SEA-Drive® Charging Procedure (Alternate Mounting)

SOP NO.

SOP-SD-004

Rev

Page

2 / 4

Model

SEA-Drive®

Variation

AS/NZ Trucks

The vehicle socket will light
up RED (Right) for 3-5
seconds before the GREEN
LED (left) begins flashing to
indicate charging has
commenced.

Confirm that the LED found at
the vehicle socket is pulsing
GREEN every 2 seconds. This
shows that the charging process
in now underway.

Only flashing indicates
charging is working. If the
LED is solid GREEN or Unlit,
refer to your owners
manual

Remove the cap and plug the
charging connector (Vehicle-side
socket) to the charging inlet.
This will lock automatically.

Phase

Step

Safe Operating Procedure

Note

Photo

Instruction

Turn the wall plug ON.

Once powered ON, check that
the in-cord charger is
operational by confirming the
charging speed is set to 32A

For correct operation of
the in cord charging device
and selecting charge
speed, please refer to the
equipment operational
manual

Remove the charging inlet cover
by rotating the cap to the left
until the handle is vertical

On opening the vehicle
charging cap, look for dirt,
debris and foreign objects.
Clean before connection if
needed.

NOTE: Charger on the truck
component box is never
live, just for power input
and will not output power.

Содержание ISUZU FSR

























































Результаты поиска

Содержание ISUZU FSR

Отзывы:

Похожие инструкции для ISUZU FSR

Бренды по названию

Популярные бренды

SEA ISUZU FSR, Руководство пользователя

Результаты поиска

Содержание ISUZU FSR

Отзывы:

Похожие инструкции для ISUZU FSR

Бренды по названию

Популярные бренды