OWNER
’
S MANUAL
(
SEA ISUZU FSR/FSD EV)
SEA-OWS-QA-004/5
ISSUE DATE:
30/05/2020
Page
33
of
56
Maintenance-free 24V Battery
Warning
➢
If the product status indicator is white and the
Vehicle fails to start up, please stop using the battery
and come to the dealer’s shop for inspection.
◆
Daily inspection
◆
For safe use of battery for a long period, inspect the
battery as specified below:
➢
Inspect status of battery;
•
Inspect product status indicator (electric eye) and inspect the necessary items;
•
Even the product status indicator is green (normal status), the Motor may fail to start up (end of
battery service life), come to service shop to inspect.
➢
Inspect if the battery is clean;
•
Inspect if the terminal is corroded; if so, use iron brush to remove the rust and apply anti-rusting agent.
•
Inspect if the top cover of battery is covered by dust, foreign matter and leaked liquid; use wet cloth
to remove them.
•
Inspect if the air hole is blocked. If so, remove the foreign matter, but do not hurt the exhaust hole.
•
Inspect if the tray is corroded. If so, disconnect the battery in specified order and then remove the
foreign matters. Then install the battery on the truck. If the battery tray is seriously corroded, the
electrolyte may flow out due to damaged battery or abnormal electric system; therefore, inspect if
the electrical system is ok.
•
If the air hole is blocked, the internal pressure increases and may explode due to gas produced inside
the battery.
•
Charge the battery where the air ventilation is good and be away from spark.
•
Do not remove the connection clamp during charging, because it may cause spark and lead to
explosion.
•
Please check the charging voltage and battery voltage. Improper charging voltage may over charge
the battery and even cause explosion.
Warning
•
Do not use dry cloth to clean the battery, because it may produce static electricity and cause explosion.
•
Connect the charger with the battery when the power supply is shut off, because it may produce spark
and cause explosion.
