Sea Tel 5012-91, Руководство по установке, Страница: 23 / 138

Installation 5012-91 Installation Manual
3-3
6. Attach shackles and four part web lifting sling
arrangement to the eyebolts.
7. Attach a suitable length tagline to one of the
eyebolts.
8. After hoisted into place the lifting eyes are to
be removed and replaced with the stainless
hardware that was removed in step 4 (the
eyes are galvanized with bare thread that will
rust if left exposed to the weather).
3.3.2. Installing the 50, 60 or 66” Radome Assembly
The antenna pedestal is shipped completely assembled in its radome.
1. Man the tag line(s).
2. Hoist the antenna assembly off the shipping pallet,
by means of a suitably sized crane or derrick, to allow
access to bottom of radome assembly.
3. Open the hatch by pressing the round release button
in the center of the black latches and gently push the
hatch up into the radome. Place the hatch door (gel
coat surface up) inside the radome on the far side of
the antenna pedestal.
4. Inspect the pedestal assembly and reflector for signs
of shipping damage.
5. Peel the paper off of the mounting pad (provided in
the radome installation kit) to expose the sticky side
of the pad, align it to the mounting holes and press it
in place on the underside of the radome base.
6. Using Loctite 271, install the four mounting bolts
(provided in radome mounting kit) into the radome
base.