Sea Ray 390 Sundancer, Руководство пользователя

Страница: 78 / 184

390 Sundancer
®
( 425 Sundancer
®
)
3.16
S
ECTION
3 • U
SING
Y
OUR
B
OAT
Make sure that the power is off before any work is
performed on the windlass.
! DANGER
W
INDLASS
(M
AINTENANCE
P
ROFILE
)
(F
IG
. 3.16.1)
EMERGENCY HANDLE
CLUTCH NUT
DRUM
UPPER CONE
CHAIN PULLEY
LOWER CONE
B. T
O
O
PERATE FROM THE
B
OW
:
• Make sure that the safety lanyard and/or chain
stop are removed from the anchor chain.
• Lift protective cap on foot switches at port bow
and depress UP or DOWN switch for the
desired result.
C. T
O
O
PERATE
M
ANUALLY
:
• Make sure that the safety lanyard and/or chain
stop are removed from the anchor chain.
• Insert the emergency handle (located in the stbd
bow locker) into the clutch nut.
• Turn handle clockwise to retrieve anchor.
D. M
AINTENANCE
:
• Periodically check the motor and control box
electrical connections, remove any residue and
cover the connections with a small coating of
grease.
It is recommended at least once a year to
disassemble the windlass and remove any residue
buildup.
• Using the emergency handle ( located in the
bow locker), unscrew the clutch nut by turning
the handle counterclockwise.
• Remove the drum, upper cone, chain wheel and
lower cone.
• Wash down with fresh water and remove any
residue.
• Coat contact surfaces with a light film of
lubricant.
• Reassemble the unit and tighten clutch by
turning the handle clockwise.
NOTE: Use the fresh water washdown spigot in
the port bow locker to hose down the chain in the
locker after haul-in.
REFER TO WINDLASS OPERATOR’S MANUAL IN YOUR
OWNER’S PACKET FOR DETAILED OPERATING
INSTRUCTIONS.
21. B
OW
T
HRUSTER
(O
PTIONAL
)
The bow thruster is electrically driven and gives
the operator more maneuverability of the bow when
docking or maneuvering the vessel in narrow
channels or where space is at a premium.
T
O
O
PERATE THE
B
OW
T
HRUSTER
• Activate the bow thruster by turning the 24V
BOW THRUSTER switch ON. The switch is
located on the control station (See figure 2.10.1
& 2.10.2)).
• By manipulating the joy stick also located on