Sea Ray 300 Sundancer, Руководство пользователя, Страница: 151 / 154

9.1
S
ECTION
9 • C
ARE
& R
EFINISHING
300 Sundancer
®
(335 Sundancer
®
)
Your new boat has been designed to provide you
with years of enjoyment and satisfaction. In order
to maintain the factory new appearance of your boat,
we recommend the use of 3M™ Marine's one step
Maintenance and Reconditioning Products designed
specifically for pleasure boats. Following proper
fiberglass maintenance guidelines will help maintain
your boat's performance, value, and enjoyment.
Gelcoat surfaces are slippery when wet.
Always wear non-slip footwear securely fastened to
your feet and hold on to rails or the boat structrue.
! WARNING
Waxed surfaces are slippery.
Do not wax areas that are usually walked on.
! WARNING
3. S
TAINS
& S
CRATCHES
Although gelcoat and painted surfaces are resistant
to deep stains, a need for cleaning will occasionally
arise. But, the use of some common cleaning agents
will permanently discolor or otherwise damage the
finish on your boat.
2. F
IBERGLASS
& G
ELCOAT
The fiberglass hull, deck and some interior parts
consist of a molded shell and exterior gelcoat. The
gelcoat is the outer surface, often colored, that
presents the shiny smooth appearance associated
with fiberglass products. This gelcoat surface is
painted or taped in some areas for styling purposes.
Wash the gelcoat and fiberglass regularly with
clean, fresh water. Wax gelcoated surfaces to
maintain the luster. In northern climates, a waxing
at the start and end of the boating season may
suffice. In southern climates, an application of wax
every three months will be required for adequate
protection.
REFER TO THE “3M
®
ONE STEP MAINTENANCE AND
RECONDITIONING PRODUCTS” PAMPHLET IN
YOUR OWNER’S MANUAL PACKET FOR
INSTRUCTIONS AND WARRANTY INFORMATION.
1. P
AINT
C
LEANING
A
GENTS
& O
THER
S
UBSTANCES
Do not use products containing chlorine,
phosphates, perfumes and non-degradable
ingredients. Consult your marine dealer regarding
environmental regulations before painting the hull.
Fumes can last for hours, and chemical ingredients
can harm people, property and the environment.
Common household cleaning agents may cause
hazardous reactions. Read and understand
directions on all paint, cleaning and polishing
materials before using.
EXPLOSION/FIRE HAZARD
Care and refinishing materials may contain
ingredients that are flammable or explosive. Do not
use such materials in the bilge
Shut off electrical power and ventilate when using
such materials anywhere on the boat or in the
cabin.
Do not create sparks or use lighted materials.
! WARNING