Sea Ray Boats 52 Sedan Bridge, Руководство пользователя

Страница: 69 / 220

52 Sedan Bridge (525 Sedan Bridge)
3.7
S
ECTION
3 • U
SING
Y
OUR
B
OAT
Shift selector(s) to NEUTRAL before starting engines.
Shift only when engine is at IDLE.
Reversing at high speeds can cause flooding/
swamping due to water being pushed over the
transom.
! WARNING
11. S
HIFTING TO
D
RIVE THE
B
OAT
Standard on the 52 DB are dual electric gear shift
and throttle engine controls. However, your yacht
may be equipped with electric or hydraulic throttle
control(s). There are different functions and
operating and maintenance instructions which must
be followed. Read and understand the information
in the Owner’s Manual Packet for your yacht
model’s gear and throttle control.
Your yacht has start in-gear protection. For safety’s
sake and as a good habit to get into, always put the
gear selector in the NEUTRAL position and the
throttle selector in the IDLE position before starting
the engines.
A. G
EAR
S
HIFTS AND
T
HROTTLE
C
ONTROLS
The gear shift lever for each engine (twin lever
controls on port side of the control station) (See
Figure 2.8.1) has three positions: FORWARD,
NEUTRAL and REVERSE. The control lever must
be in the NEUTRAL (center) position when starting
the engine(s). A positioning indent can be felt when
the control is in exact NEUTRAL. FORWARD and
REVERSE positions should always be in full travel
extremes in either direction for a positive
engagement and minimum wear.
The throttle controls (twin lever controls on
starboard side of control station) (See Figure 2.8.1)
regulate the RPM of the engines. Periodically check
and seasonally lubricate the linkage with medium
weight oil.
NOTE: Prior to starting engines, put throttles at IDLE
and gearshifts in NEUTRAL.
Shift quickly; easing into gear can damage the
transmission.
Hydraulic controls FORWARD and REVERSE
positions should always be in full travel extremes in
either direction for positive engagement and
minimum wear.
! CAUTION
PORT STBD
VARIABLE
FULL
THROTTLE
IDLE
NEUTRAL
REVERSE
FORWARD
PORT STBD
ENGINE GEARSHIFTS ENGINE THROTTLES
E
NGINE
S
HIFT AND
T
HROTTLE
F
UNCTIONS
(F
IG
. 3.8.1)
Cockpit can fill with water if boat is moving forward,
when it is put into reverse.
Before shifting into reverse, shift to neutral, wait for
the boat to stop moving forward, then shift into
reverse.
! CAUTION
B. O
PERATION
1. Throttle Levers:
Forward Motion = Increases Throttle
Aft Motion = Decreases Throttle
2. Gearshift Levers:
Forward Position = FORWARD
Center Position = NEUTRAL
Aft Position = REVERSE