Sea Ray Boats 52 Sedan Bridge, Руководство пользователя

Страница: 76 / 220

52 Sedan Bridge (525 Sedan Bridge)
3.14
S
ECTION
3 • U
SING
Y
OUR
B
OAT
W
INDLASS
(M
AINTENANCE
P
ROFILE
)
(F
IG
. 3.14.1)
LOWER CONE
CHAIN PULLEY
DRUM
CLUTCH NUT
EMERGENCY HANDLE
UPPER CONE
D. M
AINTENANCE
:
• Periodically check the motor and control box
electrical connections, remove any residue and
cover the connections with a small coating of grease.
It is recommended at least once a year to
disassemble the windlass (see Fig. 3.16.2) and
remove any residue build-up.
• Using the emergency handle, unscrew the
clutch nut by turning the handle
counterclockwise.
• Remove the drum, upper cone, chain wheel and
lower cone.
Make sure that the power is off before any work is
performed on the windlass.
! DANGER
C. T
O OPERATE MANUALLY
:
• Make sure that the safety lanyard (see Fig.
3.13.1) is removed from the anchor chain.
• Insert the emergency handle into the clutch nut
(see fig 3.14.1)
• Turn handle clockwise to retrieve anchor.
B. T
O OPERATE FROM THE BOW
:
• Make sure that the safety lanyard (see Fig.
3.13.1) is removed from the anchor chain.
• Lift protective cap on foot switches (see Fig.
3.13.1) and depress UP or DOWN switch for
the desired result.
• Wash down with fresh water and remove any
residue.
• Coat contact surfaces with a light film of
lubricant.
• Reassemble the unit and tighten clutch nut by
turning the handle clockwise.
NOTE: Use the fresh water washdown spigot in
the starboard bow locker to hose down the chain in
the locker after haul-in.
REFER TO WINDLASS OPERATOR’S MANUAL IN
YOUR OWNER’S PACKET FOR DETAILED
OPERATING INSTRUCTIONS.
• Push the toggle switch (located beside the
rocker switch on the control station switch panel)
UP to raise the anchor. To lower the anchor,
push the toggle switch DOWN.