Sea Pro 248, Руководство пользователя

Страница: 28 / 50

28 248 BAY SERIES
Raw Water Washdown:
Your SEA PRO 248 is equipped with a Raw Water
washdown feature. The ability to rinse down the deck
and other parts of the boat helps to maintain the
condition, cleanliness and value of your boat. The system
supplies water from a pump via a thru
- hull fitting and
seacock to a standard hose connection.
The pump is located in the
Lazzarette compartment,
in the cockpit, along with
the livewell pumps. The
washdown pump accesses
water through the same
seacock and thru
- hull
fitting as the port
livewell pump. Therefore
it is imperative that the seacock lever be in the open
position prior to using the washdown system. The
washdown pump is activated by the
“ PUMPS -
WASHDOWN ” switch located on the Helm Switch Panel.
The water outlet and standard garden hose connection
are located at the aft,
below the starboard
storage compartment. It
will be next to the deluxe
tackle storage
compartment if your
SEA
PRO 248 has been
outfitted with them.
The outlet connection includes a tethered
cap that should remain in place on the
outlet when the system is not in use.
1. Open the Seacock located at
the bottom of the port
livewell pump. The seacock is
closed when the handle is in
a horizontal position, and is
open when moved to a
vertical position.
2. Remove the water outlet cap and connect a hose with
a standard garden hose fitting.
3. Activate the pump by flipping the switch on the Helm
Switch Panel labeled
“ PUMPS - WASHDOWN ”.
Regularly check all fittings and
connections for leaks and
periodically check the inline strainer
located at the pump and clean when
necessary..
Be sure to remove the hose, replace the outlet cap, and
close the port livewell pump seacock when use of the
washdown system is complete.
Refer to the Pump Owner ’ s Manual for further
instructions, maintenance, and specification
information.
OPEN
SYSTEMS & COMPONENTS
FPO