26
248 BAY SERIES
Trim tab Control:
Trim Tabs are an option that may be installed on your
SEA
PRO
boat. The Trim Tabs will be attached at the transom,
close to the bottom edge, Port and Starboard.
Trim Tabs are used to adjust the level of the vessel fore
(front) and aft (back), thus adjusting how the vessel
performs while in operation.
“
trimming
”
the tabs down
causes upward pressure of the water to increase the
riding level of the transom, which will lower the bow.
Benefits of a properly
“
trimmed
”
boat can:
•
Increase operator visibility
•
Decrease time required to get vessel on plane
•
Increase fuel economy
•
Decrease wear on the engine
•
Improve steering operation
•
Increase speed and performance
•
Balance weight distribution
•
Correct listing caused by strong cross winds
•
Improve handling in choppy or rough water
The control panel for the Trim tabs is located on the
Helm.
The Port and Starboard
Trim Tabs can be
operated independently.
LED
’
s provide visual
indication of the
position of each tab, and
control labels indicate
BOW Down or UP
operation.
Refer to the Owner
’
s Manual for further operation,
maintenance and specification information.
Static Jack Plate:
A
“
Static
”
(manually adjusted) Jack
Plate has been installed on your
SEA
PRO
boat as a standard feature. A
Jack Plate can improve the
performance of any boat by allowing
you to raise and lower your
outboard motor, positioning the
motor height in a precise position for
the current conditions.
The Z
-
Lock
TM
Manual Jack Plate;
•
eliminates side to side slippage.
•
Has
5”
of vertical adjustment.
•
Made from Aircraft Grade Aluminum.
SYSTEMS & COMPONENTS
Содержание 248
