3. Open the Buoyancy Chamber and add a small amount
of rocks or a lead weight (see fig. 5).
4. Replace the Buoyancy Chamber and the Nose Cone and
latches and place the SEASCOOTER
™
in the water. If the
SEASCOOTER
™
is neutrally buoyant will just float in the
water.
Fig.2
Shown in "ON" position
Rotate to turn "OFF"
6
7
Rotate 180
o
and remove to open
Fig.4
Do not dive deeper than you would normally when
snorkeling, to ensure you can get back to the surface
safely.
Use of Variable Speed.
Your Seascooter features two speeds - for normal speed,
pull the right trigger only. For the higher speed, pull both
triggers together.
Using the SEA-DOO
®
SEASCOOTER™ VS Supercharged
for diving - adjusting the buoyancy.
Your SEASCOOTER
™
can be used for diving up to 30m/100ft
but will need to be adjusted for neutral buoyancy. The
SEASCOOTER
™
must never be adjusted for negative
buoyancy to avoid it sinking if accidentally released.
To adjust for neutral buoyancy follow these instructions
1. Make sure the SEA-DOO
®
SEASCOOTER
™
VS Supercharged master switch is in the Off position.
2. Remove the SEASCOOTER
™
from the water, give a half
turn to the Latches, remove them (see fig. 4) and remove
the Buoyancy Control Chamber.
CAUTION
Fig.3
7. Proper posture when using the SEA-DOO
®
SEASCOOTER
™
VS Supercharged
is important to
achieve the maximum speed - see fig. 3 for the correct
position of the SEA-DOO
®
SEASCOOTER
™
VS
Supercharged when using it.