Sea-doo SWITCH 13 FT 2022, Руководство оператора, Страница: 99 / 206

97
Turn on bilge blower for at least 4 mi-
nutes before starting the engine.
W WA AR RN NIIN NG G
–– A Allw wa ayyss a accttiivva atte e b biillg ge e b bllo ow we err a att
lle ea asstt 4 4 m miin nu utte ess m miin niim mu um m b be e--
ffo orre e sstta arrttiin ng g tth he e e en ng giin ne e tto o a all--
llo ow w tth he e b biillg ge e b bllo ow we err tto o
vve en nttiilla atte e tth he e b biillg ge e..
–– IItt iiss a allsso o rre ecco om mm me en nd de ed d tto o a accttii--
vva atte e tth hiiss b bllo ow we err w wh he en n e en ng giin ne e
iiss a att iid dlle e,, w wh hiille e b be ello ow w ccrru uiissiin ng g
ssp pe ee ed d a an nd d a afftte err sstto op pp piin ng g
e en ng giin ne e..
T Trriim m T Ta ab bss
This watercraft comes equipped with
manually adjustable trim tabs at the
rear. They can be adjusted to get the
watercraft on plane sooner or later.
They can also be used to adjust bal-
ance the watercraft side to side. Refer
to
Adjusting the Trim Tabs Stiffness .
A Ad djju ussttiin ng g tth he e T Trriim m T Ta ab bss S Sttiiffffn ne essss
Adjusting the trim tabs stiffness will
modify the behavior of the watercraft.
Adjust trim tabs stiffness in small in-
crements will help avoid over-trim-
ming, which occurs when you’ve
deflected the tabs too far. An over--
trimmed
watercraft will “plow” or
“bow-steer”.
Adjusting both trim tabs at the same
position will ensure side-to-side level.
Adjusting one side lower will help bal-
ance cargo load and/or passenger
weight.
To get the watercraft to plane at a low-
er speed, adjust trim tabs stiffer. Inver-
sely, to get the watercraft to plane at a
higher speed, adjust trim tabs softer.
To adjust, remove the fasteners and
change the position of the gas spring
lower mounting on the trim tabs.
1. Higher speed to plane
2. Lower speed to plane
Install fasteners and tighten to
specification.
Tightening Torque
M6 screw
1.75 ± 0.25 Nm
(15 ± 2 bf-in)
EQUIPMENT