Sea-doo 2001 GTS Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 180

Sea-doo 2001 GTS Скачать руководство пользователя страница 72

EQUIPMENT

NOTICE

Ensure drain plugs are

properly secured prior to launching
the watercraft in water.

9) Ski/Wakeboard Post

(WAKE Model Only)

Pull up on the knob to extend the post.
Ensure both sections of post are fully
extended and properly locked before
attaching ski or wakeboard rope.

smo2011-003-015_a

TYPICAL - SKI/WAKEBOARD POST
RETACTED

1. Pull on this knob to extend

smo2011-003-016

TYPICAL - SKI/WAKEBOARD POST
EXTENDED

To retract the post, push straight down
on the top of the post.

If the post becomes difficult to extend
or retract, simultaneously push in on
both sides of the locking clip toward
front of watercraft.

smo2011-003-017_a

TYPICAL - PUSH TOWARD FRONT TO
UNLOCK AND REMOVE POST

1. Locking clip

WARNING

Make sure ski/wakeboard post is
fully extended and locked before
use. Completely retract and lock
when not used. Use caution with
skier/wakeboarder in tow as tow
rope may backlash to watercraft
when released. Never perform a
sharp turn when towing a skier,
wakeboarder or any toy.

NOTICE

The ski/wakeboard post is

designed for towing a skier or wake-
boarder with a maximum gross
weight of 114 kg (250 lb).

Always have one person other than the
operator as an observer.

NOTE:

The

handles

on

the

ski/

wakeboard post are provided as a
handhold for the observer.

NOTICE

Never

use

the

ski/

wakeboard post to tow other water-
craft. Respect the maximum load
limit rating of the ski/wakeboard
post. Overloading can affect ma-
neuverability, stability and perfor-
mance.

10) Wakeboard Rack

(WAKE Model Only)

A convenient removable rack to carry a
wakeboard on the watercraft when on
the water.

70

______________

«
...
70
71
72
73
74
...
»

Содержание 2001 GTS





















































































































































































Отзывы:

Нет отзывов