Sea-doo 2001 GTS Скачать руководство пользователя страница 66

Страница: 66 / 180

INFORMATION CENTER (GAUGES) (GTI/GTR/WAKE)

MESSAGE DISPLAYED

DISPLAY

2. Press the SET button to enter the

DISPLAY function.

3. Press the UP/DOWN button until

the preferred indication is visible in
the multifunction display (as appli-
cable to model).

– RPM
– SPEED
– CLOCK
– ENGINE TEMP
– ALTITUDE
– TOP SPEED
– AVG SPEED
– TOP RPM
– AVG RPM.

NUMERICAL DISPLAY SELECTION

1. Type of selected numerical display

indication

2. Applicable value

4. Press the SET button to select and

save the preferred indication, or
wait for the display function to time
out. The last indication visible will
be automatically saved.

Resetting Numerical
Display Indication

The following numerical display indica-
tions can be reset when selected:

– Average fuel consumption
– Top speed
– Average speed
– Top RPM
– Average RPM.

To reset the indication. double click the
SET button. The numerical display will
momentarily indicate zero (0).

NOTE:

Each of these functions be-

come active

ONLY

when selected as

the numerical display indication.

Multifunction Gauge
Setup

Clock Setting

1. Press the MODE button repeatedly

until SETTINGS is visible in the mul-
tifunction display.

MESSAGE DISPLAYED

SETTINGS

2. Press the UP/DOWN button repeat-

edly until CLOCK is visible.

______________

Содержание 2001 GTS





















































































































































































Результаты поиска

Содержание 2001 GTS

Отзывы:

Sea-doo 2001 GTS, Руководство оператора, Страница: 66 / 180

Результаты поиска

Содержание 2001 GTS

Отзывы: