Sea-doo 2001 GTS Скачать руководство пользователя страница 53

Страница: 53 / 180

INFORMATION CENTER (GAUGE) (GTS)

WARNING

Do not adjust the display while riding, you could lose control.

smo2011-003-024_a

TYPICAL - GTS MODELS

1. Multifunction gauge

Multifunction Gauge
Description

smo2011-003-021_b

1) Multifunction Display

The multifunction display is used to:

– Display the WELCOME message

on power up

– Display the KEY recognition mes-

sage

– Display the engine RPM
– Display fault messages.

NOTE:

If a fault occurs, it will period-

ically scroll the applicable fault mes-
sage in the display and revert to the
RPM indication depending on the
severity of the fault detected.

2) Numerical Display

The numerical display provides an indi-
cation of estimated watercraft speed.

3) Touring Mode Indicator

When the TOURING mode indicator is
ON, the default TOURING mode is ac-
tive.

Refer to

OPERATING MODES

subsec-

tion for details.

_______________

Содержание 2001 GTS





















































































































































































Результаты поиска

Содержание 2001 GTS

Отзывы:

Sea-doo 2001 GTS, Руководство оператора, Страница: 53 / 180

Результаты поиска

Содержание 2001 GTS

Отзывы: