Sea-doo 2001 GTS Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 180

Sea-doo 2001 GTS Скачать руководство пользователя страница 16

SPECIAL SAFETY MESSAGES

– Approach a person in the water from

the lee side (opposite the direction
of the wind). Turn off the motor be-
fore coming close to the person.

– Participate in water sports only

in safe areas.

Stay away from

other boats, channels, beaches,
restricted areas, swimmers, and
heavily traveled waterways and un-
derwater obstructions.

– Turn off the engine and secure the

watercraft in place before swim-
ming.

– Swim only in areas designated as

safe for swimming. These are usu-
ally marked with a swim area buoy.
Do not swim alone or at night.

F00A2LY

SWIM AREA BUOY

– Do not water ski between sunset

and sunrise. It is illegal in most ar-
eas.

– Do not drive the watercraft directly

behind a water skier, tuber or wake-
boarder. At 40 km/h (25 MPH) per
hour, the watercraft will overtake a
person who falls in the water 60 m
(197 ft) in front of your watercraft in
about 5 seconds.

– Shut off the engine and remove the

tether cord from the engine cut-off
switch when anyone is in the water
nearby.

– Stay at least 45 m (148 ft) away

from areas marked by a diver down
float.

Avoid personal injury!

Do not allow

anyone near the propulsion system or
intake grate, even when the engine
is off. Items such as long hair, loose

clothing or personal flotation device
straps can become entangled in mov-
ing parts resulting in serious injury or
drowning. In shallow water, shells,
sand, pebbles or other objects could
be drawn up by the jet pump and be
thrown rearward.

F00A2MY

DIVER DOWN FLOAT

For more information on approved, le-
gal and safe practice of water sports,
please contact the local legal authority
on water sports safety for the area you
plan to practice in.

Hypothermia

Hypothermia, the loss of body heat
resulting in a subnormal body temper-
ature, is a significant cause of death in
boating accidents. After an individual
has succumbed to hypothermia, he or
she will lose consciousness and then
drown.

PFDs can increase survival time be-
cause of the insulation they provide.

Naturally, the warmer the water, the
less insulation one will require. When
operating in cold water (below 4°C
(40°F)) consideration should be given
to using a coat or jacket style PFD as
they cover more body area than the
vest style PFDs.

14

_______

SAFETY INFORMATION

________

«
...
14
15
16
17
18
...
»

Содержание 2001 GTS





















































































































































































Отзывы:

Нет отзывов