Sea-doo 2001 GTS Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 180

Sea-doo 2001 GTS Скачать руководство пользователя страница 31

IMPORTANT ON-PRODUCT LABELS

Watercraft Safety Labels

These labels are affixed to the vehicle for the safety of the operator, passenger
(2-UP) or bystanders.

The labels illustrated on the following pages are on your watercraft. If missing or
damaged, they can be replaced free of charge. See an authorized Sea-Doo dealer.

Please read the following labels carefully before operating this watercraft.

NOTE:

The first illustration of the watercraft indicates the approximate locations

of the various labels. A dotted line indicates that the label is not on the outer sur-
face, and that the seat or a cover of some type must be opened to see the label.

NOTE:

In the event of any discrepancy between this guide and the vehicle, the

safety labels on the vehicle have precedence over the labels in this guide.

6,17

3

4,5,7,8,9

1,

2

1

0

smo2011-003-001_a

WATERCRAFT SAFETY LABEL LOCATION - GTS MODELS

6,17

3

4,5,7,8,9

1,

2

1

0

1

3

1

2

11

14

smo2011-003-002_a

WATERCRAFT SAFETY LABEL LOCATION - GTI SERIES

________

SAFETY INFORMATION

________

29

«
...
29
30
31
32
33
...
»

Содержание 2001 GTS





















































































































































































Отзывы:

Нет отзывов