Manual revision 005
Appendix V: Manual Revision History
SBE 63
45
Appendix V: Manual Revision History
Manual
Version Date
Description
001
02/12
•
Initial release of production units.
002
05/12
•
Firmware 1.1: Update status responses to show setting for new command
*serpause =
(factory setting).
•
Add information on use with SBE 37 MicroCATs (SMP-ODO, IMP-ODO, SIP-ODO).
•
Remove information that SBE 19
plus
V2 must be in moored mode for use with the SBE 63 (it can
be moored or profiling mode).
•
Add information on photobleaching to Sensor Calibration in Section 6.
•
Add information on Triton-X to glossary.
•
Correct typos.
003
06/12
•
Correct units in specification -- correct units are µmol/kg, not µM/kg.
•
Maximum depth rating 7000 m, not 5000 m.
•
Update initial accuracy specification.
•
Add example calibration sheets, and information on converting data output to engineering units if
not using Sea-Bird software.
•
For Argo float CTD, add information that RS-232 interface required in float controller.
•
For integration with RS-485 MicroCAT CTD, add information on required <SerPause> setting.
•
Add troubleshooting for incorrect calibration coefficients in MicroCAT integrated with SBE 63.
•
Add information on limitations with high baud rates.
004
01/13
•
Firmware 2.0.0: Update GetHD response.
•
Clarify that the raw output is the phase
delay
.
•
Update information on software compatibility.
•
Correct typos.
005
04/13
•
Firmware 3.0.1: Add SetEcho= command, update status responses.
•
Update power consumption to 0.08 J/sample from 0.2 J/sample.
•
Remove 2000 m option.
•
Update drawings, photos, and mount kit part numbers for latest hardware versions (new sensor
connector and sensor mount).
•
Update Serial Port Config dialog in Seaterm232.
•
Add cables and sensor mount kits for SeaCAT interface to replacement parts.
•
Fix typos.
