Section 4: Setting Up MicroTSG
SBE 45
28
Setup
Commands
Baud=x x=
baud rate (1200, 2400, 4800, 9600, 19200,
or 38400). Default 4800.
OutputFormat=x x=0
(default): Output order is temperature,
conductivity, salinity, sound velocity.
x=1
: Suppress space before
conductivity output.
x=2
: Reverse conductivity and salinity order.
This is not compatible with Seasave, SBE Data
Processing, or optional Interface Box.
OutputCond=x x=Y
(default): calculate and output
conductivity (S/m).
x=N
: do not.
OutputSal=x x=Y
: calculate and output salinity (psu).
x=N
(default): do not.
OutputSV=x x=Y
: calculate and output sound velocity
(m/sec). Can be calculated as Chen and Millero
or as Wilson; select desired algorithm with
SVAlgorithm=
.
x=N
(default): do not.
SVAlgorithm=x x=C
: If
OutputSV=Y
, calculate sound
velocity using Chen and Millero formula
(UNESCO Technical Papers in Marine
Science #44). Default.
x=W
: If
OutputSV=Y
, calculate sound
velocity using Wilson formula (UNESCO
Technical Papers in Marine Science #44).
NCycles=x x=
number of measurements to average per
sample (default = 4). Increasing
NCycles=
increases measurement resolution and time
required for measurement. See
Sample Timing
in
Section 2: Description of MicroTSG
.
QS
Quit session and place MicroTSG in quiescent
(sleep) state. Sampling stops. Applicable only
if PCB J1 jumper is in Normal position.
Notes:
•
The MicroTSG’s baud rate (set
with
Baud=
) must be the same
as SEATERM’s baud rate (set in
the Configure menu).
•
The maximum baud rate is
dependent on cable length.
See
Baud Rate, Cable Length,
Power, and Data Transmission
Rate
in
Section 2: Description
of MicroTSG
.
Notes:
•
See
Data Output Format
.
•
Seasave, SBE Data Processing,
and the optional Interface Box
are all compatible with any
combination of output
parameters, if
OutputFormat=0
or
1
.
33
Содержание SBE 45 MicroTSG
