manualshive.com logo in svg

Sea-Bird Electronics SBE 45 MicroTSG, Руководство пользователя

Поделиться
Скачать
Sea-Bird Electronics SBE 45 MicroTSG Скачать руководство пользователя страница 127

                 

  

ISO 9002 CERTIFIED

 

Sud-Chemie Performance 

Packaging 

101 Christine Dr. 

Belen, New Mexico  87002 

Phone: (505) 864-6691 

Fax: (505) 864-9296

 

MATERIAL SAFETY DATA SHEET – August 13, 2002 

SORB-IT

®

 

Packaged Desiccant 

6 

 
* No Information Available 
 
HMIS (Hazardous Materials Identification System) for this product is as 
follows: 
 
Health Hazard 

0 

Flammability 0 
Reactivity 0 
Personal Protection 

HMIS assigns choice of personal protective equipment to the 
customer, as the raw material supplier is unfamiliar with the 
condition of use. 

 

The information contained herein is based upon data considered true and accurate.  However, United Desiccants makes no warranties 
expressed or implied, as to the accuracy or adequacy of the information contained herein or the results to be obtained from the use 
thereof.  This information is offered solely for the user's consideration, investigation and verification.  Since the use and conditions of 
use of this information and the material described herein are not within the control of United Desiccants, United Desiccants assumes no 
responsibility for injury to the user or third persons.  The material described herein is sold only pursuant to United Desiccants' Terms 
and Conditions of Sale, including those limiting warranties and remedies contained therein.  It is the responsibility of the user to 
determine whether any use of the data and information is in accordance with applicable federal, state or local laws and regulations. 

 

 

124

Содержание SBE 45 MicroTSG
















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды