SCUBAPRO-UWATEC galileo luna, Руководство пользователя

Страница: 53 / 76

3. Diving with Galileo
51
3. Diving with Galileo
English
Decompression information at MB L0: if
you are diving with an MB level different than
MB L0, you can ask Galileo to show you
the decompression information pertinent to
the underlying MB L0 calculation. For more
information on MB levels, please refer to
section 3.5.
3.3.2 CLASSIC screen configuration
This screen configuration presents dive
parameter information in a classic UWATEC
arrangement. More specifically, the
following information is displayed:
- current depth
- dive time
- no-stop time (only during no-stop phase
of dive)
- deepest stop, duration of deepest
stop, total ascent time (only during
decompression phase of dive)
- tank pressure
- RBT
- oxygen concentration (until maximum
depth is reached)
- maximum depth (only if max depth is
1m/3ft greater than current depth)
- water temperature
- nitrogen loading (via right bar graph)
- oxygen toxicity (via left bar graph)
Upon pressing the middle button (marked
“ MORE ”), the information in the left corner
changes in the following sequence:
- max depth
- O
2
%
- stopwatch
- buddy tank pressure (only if
BUDDY
tank designation has been paired, see
section 1.11)
- (active MB level if different than L0)
- (no-stop or decompression information
relative to L0 if an MB level between L1
and L5 is active, see section 3.5.3)
- time of day
- CNS O
2
- average depth
- ppO
2
Each time you press the button the
information changes to the next one in the
sequence and stays there until you
press
the button again. If you press the button
while the ppO
2
is displayed, the cycle starts
again from the maximum depth.
The stopwatch runs in the background
at all times. Each
press of the left button
(“
BOOK
“) resets and restarts it, whether it
is showing on the display or not.
3.3.3 LIGHT screen configuration
This screen configuration is meant for
those divers that prefer to focus only on the
essential information for the dive, yet retain
the ability to access some of the remaining
information as alternate fields.
The
LIGHT
configuration is possible
during no-stop diving only: as soon as
you enter level stops or deco, the screen
configuration will automatically switch to
the
CLASSIC layout in order to fit all the
relevant information.