SCUBAPRO-UWATEC galileo luna, Руководство пользователя

Страница: 26 / 76

2. Menus, settings and functions
24
2. Menus, settings and functions
2.4.2 Setting the auto-off time
(default: 15 seconds)
While diving, the compass layout replaces
the main dive computer screen configuration
when the right button is
pressed and
held
. When in compass mode, Galileo
uses more battery energy than normal, so
it is desirable to have the computer switch
back to the regular configuration after a
certain time interval. This menu allows you
to set this time interval between
5 , 10 , 15 ,
30
and
60
seconds or to
PUSH ON/PUSH
OFF . In this last setting, the compass layout
remains on the screen until you press and
hold the right button to revert to the regular
dive computer screen configuration.
F
NOTE:
- If a warning or an alarm is triggered
while in compass mode, Galileo
switches back to the regular layout
regardless of the auto-off setting.
- If Galileo is in compass mode
when it enters level stops or
decompression, it also switches
back to the regular layout regardless
of the auto-off setting.
2.4.3 Setting the declination
(default: 0 degrees)
Depending on the exact location on the
planet, there can be a deviation between
true North and magnetic North. Any
compass will always show magnetic North,
so via this menu you can set a value for
the so-called declination that will make the
compass show true North instead.
2.5 Altimeter
This menu allows you to use Galileo as
an altimeter. Upon entering this menu,
the current altitude is displayed. Altitude
is interpreted by the computer from the
measured barometric pressure and, as
such, it is strongly dependent on the
weather. Consequently, for accurate
altitude measurements, the altimeter has
to be set to a known altitude at least once
a day.
To set the altitude, first press “ ADJ ” to
enter the ADJUST ALTITUDE menu. Once
inside this menu, use the “ + ” or “ – ” buttons
until you reach the desired value. Each time
you
press “ + ” or “ – ”, the displayed altitude
will change in 10m/50ft increments. Press
“ SAVE ” to confirm your choice and return
to the main Altimeter menu.