SCUBAPRO-UWATEC galileo luna, Руководство пользователя

Страница: 50 / 76

3. Diving with Galileo
48
3. Diving with Galileo
!
WARNING
If the REPLACE BATTERY message
appears during the dive, start the procedure to
terminate the dive, as the computer may fail.
Do not let the battery reach this condition!
In a REPLACE BATTERY situation, the
message is displayed on the bottom of
the screen in 4 second intervals. In
LIGHT
screen configuration, the display switches
to
CLASSIC to allow for all the relevant
information to be shown.
In addition to monitoring the status of its
own battery, Galileo also monitors the
status of the battery in the Smart transmitter
and alerts you when the battery is low and
should be replaced. The message
T1
BATTERY LOW is displayed on the middle
row of the screen in 4 second intervals. In
LIGHT screen configuration, the display
switches to CLASSIC to allow for all the
relevant information to be shown.
3.3 Display information
Upon immersion, the water contacts will
automatically activate Galileo, unless they
have been turned
OFF . In this case, you
must activate the computer manually
before starting the dive. See section 2.8.6
for more information.
At a depth of 0.8m/3ft, Galileo starts to
monitor depth and time and also to perform
decompression calculations.
Details on the information displayed can be
found in the next sections.
3.3.1 Description of entries
This section complements the information
listed in the Glossary by adding specific
details about Galileo’s screen while diving.
The
dive time is displayed as dive time
in minutes. If during the dive you ascend to
the surface, the time spent on the surface
will only be counted if you descend again
below 0.8m/3ft within 5 minutes. This
allows for brief periods of orientation.
While on the surface, the time will not
show as progressing but it is running in the
background. As soon as you submerge,
the time will resume, including the time
spent on the surface.