SCUBAPRO-UWATEC galileo luna, Руководство пользователя

Страница: 15 / 76

1. Introduction to Galileo 1. Introduction to Galileo
13
English
1.9 Button operation
Galileo has three buttons. These buttons
allow to access menus and change settings
while in surface mode. During the dive they
set bookmarks, allow to display further
information on the computer screen and
to activate the backlight. Each button can
perform two tasks, depending on whether
it is
pressed or pressed and held (see
definition in glossary in section 1.1).
The abbreviated description on the display
under each button refers to its function
when
pressed
. The function performed
by pressing and holding each button is
described only in the manual.
1.10 Button functions on the
surface
Pressing the “ MENU ” button gives access
to the list of menus. Pressing and holding
the “ MENU ” button jumps straight to the
oxygen setting menu.
Pressing the “ LOG ” button jumps
straight to the logbook menu.
Pressing
and holding the “ LOG ” button brings up
the gas summary table, followed by the
picture- viewing function.
Pressing the “ LIGHT ” button activates
the backlight. Pressing and holding
the “ LIGHT ” button accesses the digital
compass.
Left
button
(
MENU )
Middle
button
(
LOG )
Right
button
(
LIGHT )
Press Main
menu Logbook Activate
backlight
Press
and
hold
Oxygen
setting Gas
summary
table,
then
pictur
viewing
function Digital
compass
1.11 Mounting and pairing
of the high-pressure
transmitter
Galileo can receive tank pressure
information via patented interference-free
communication from the UWATEC Smart
high pressure transmitter. The transmitter
needs to be mounted on a high-pressure
port of a first-stage regulator.
To mount the transmitter, first remove the
high-pressure port plug from the first stage
regulator, then screw the transmitter in
place.
F
NOTE:
- Do not hold the transmitter by the
plastic cap.
- Use an appropriate wrench to
tighten the transmitter.
The Smart transmitter communicates via
radio frequency with Galileo. For best
transmission, we recommend positioning
the transmitter as described in the pictures
below.
In order for Galileo to display the
pressure signal from a Smart transmitter,