SCS PACTOR III, Руководство по установке

Страница: 47 / 57

3. Installation
41
3.5.2 Connection PTC – Kenwood
Most Kenwood transceivers that use 13 pin DIN plug (ACC2) can be connected this way:
Signal PTC Color Kenwood
GND PIN 2 white PIN 4, 8, 12
PTT PIN 3 yellow PIN 9
AF-OUT PIN 1 violet PIN 11
AF-IN PIN 4 green PIN 3
This cable is available completely assembled.
Refer to chapter 5 on page 49 .
Table 6: KENWOOD
The TS-50 can only be connected via the microphone jack:
Signal PTC Color Kenwood
GND PIN 2 white PIN 7, 8
PTT PIN 3 yellow PIN 2
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 6
Table 7: KENWOOD TS-50
The TS-480 has a 6 pin Mini-DIN connector:
Signal PTC Color YAESU
GND PIN 2 white PIN 2
PTT PIN 3 yellow PIN 3
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 5
This cable is available completely assembled.
Refer to chapter 5 on page 49 .
Table 8: KENWOOD 6 pin Mini-DIN
3.5.3 Connection PTC – YAESU
Some YAESU transceivers use a 5 pin DIN plug (Packet) and can be connected this way:
Signal PTC Color YEASU
GND PIN 2 white PIN 2
PTT PIN 3 yellow PIN 3
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 4
Table 9: YAESU 5 pin
Smaller YAESU’s use a 6 pin Mini-DIN-connector, whereby with multiband transceivers two
different connection schemes must be distinguished: