SCS P4dragon DR-7800, Руководство по установке

Страница: 71 / 96

5. Installation
5.4.4 Using SER2NET
After having made the settings described above, simply press the button
Create COM
.
Figure 13: SER2NET configuration
You now see the VSP (
v
irtual
s
erial
p
ort) Status has switched to
Created
and the LAN Status
has switched to
Connected.
As soon as a program is started which uses the created COM port (in this example COM5), the
window shows the VSP status
Opened
and the serial port parameters (baudrate and so on) are
displayed. The
Counters
field counts the packages transferred and increases the values with
usage time and amount of data running through the virtual serial link.
Certainly, as shown below, the
Port Name
must match with the COM port used in the terminal
program (the example below shows Airmail’s Dump-Terminal).
To remove the virtual serial port again, first close the (terminal) program which is using it to
access the modem. Then click at
Delete COM
. The modem is now released and can be used by
other users in the network or from the Internet.
If the modem is
not released
, other users trying to access it will receive an error message from
the SER2NET driver. The VSP status “Created” and the LAN status “Connected” will not be
achieved. The error message received depends a bit on the version of the HW-group driver
used. The current one shown here for example displays an “Access violation”. Earlier versions
simply remain in the “Disconnected” condition.
66