SCS P4dragon DR-7800, Руководство по установке

Страница: 65 / 96

5. Installation
Figure 3:
P4
dragon
with flipped down front panel
Now, from the rear side, press a bit on the network cable connector to unlock the main board:
Figure 4: Pushing out the mainboard
Now the main board can be pulled out of the aluminium housing.
The Bluetooth transceiver is to be installed behind the three LEDs on the front side of the
modem. This location ensures a good radiation of the Bluetooth signal and a good long range
performance.
Next, press in the standoffs into the mainboard. The standoffs have two ends with are different:
Figure 5: Bluetooth module fastening standoff
The mainboard side has to be inserted into the
P4
dragon mainboard. Best it to use a calliper for
that while the mainboard lies on soft but solid ground.
60