ENGLISH - Screen user manual
Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: Manual CLIC rev5 | 03.02.2015| Download at: www.screenresearch.com 2015 AdeoSreen All Rights Reserved.
Page 7
05
05
05
05 WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
Our screens are suitable for indoor use at normal temperature (20 - 25 °C) and humidity conditions. Special precautions are necessary for outdoor use, especially as regards
temperature levels and the presence of dust. Exposure to temperatures of over 50 °C can cause permanent deformation of the screen’s flatness, or the screen to come away
from the roller.
Avoid prolonged exposure of the projection screen to solar light to prevent yellowing of the same (ensure that exposure to solar light does not cause the screen to reach said
temperature level).
Since electrostatic charge tends to accumulate on the projection screen (which is made of PVC), attracting dust, excessive dustiness in the projection environment can
deteriorate the optical quality of the screen (see projection screen cleaning instructions).
WARNING: Do not manually force the screen’s unrolling: this could result in the motor being damaged or the screen’s case to come away from the wall mount brackets.
Do not allow children to play with the screen’s control panel. Keep remote control out of children’s reach.
Monitor screen movement and allow no-one near it until it is completely closed.
The following operations: blocking, preventing or forcing the screen’s movement, hanging or swinging from it, adding or applying any object to the screen or backdrop,
modifying the screen’s structure – are strictly forbidden and could result in damages to the screen’s rolling system and ensuing hazard to persons and things.
06
06
06
06 CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
Screens and their projection surfaces are delicate and must be cleaned with great care, according to the following instructions:
Never use solvents, chemical or abrasive products, or pointed tools to clean the surface.
Avoid contact with other materials (varnishes, inks etc) as they might be impossible to remove from the canvas.
FABRIC
FABRIC
FABRIC
FABRIC CLEARPIX
CLEARPIX
CLEARPIX
CLEARPIX: Use a soft, clean, dampened cloth, wiping from the center of the projection surface towards the outer edges. A vacuum-cleaner brush may be used, provided its bristles are soft and
perfectly clean.
FABRIC
FABRIC
FABRIC
FABRIC SOLIDPIX, MULTIPIX,
SOLIDPIX, MULTIPIX,
SOLIDPIX, MULTIPIX,
SOLIDPIX, MULTIPIX,:
Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary.
Clean the projection screen with a soft, clean, damp cloth, and a neutral or alcohol-base detergent as necessary. Since rubbing the screen with a cloth during cleaning operations can cause electrostatic
charge to accumulate, we recommend the subsequent application of an antistatic liquid with a clean cloth, to avoid dust being attracted again
FABRIC SILVERPIX
FABRIC SILVERPIX
FABRIC SILVERPIX
FABRIC SILVERPIX is Mandatory to read the instructions accompanying the fabric screen
GENERIC
GENERIC
GENERIC
GENERIC PROFIL
PROFIL
PROFIL
PROFILE
EE
E:::: Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary
VELVET PROFILE
VELVET PROFILE
VELVET PROFILE
VELVET PROFILE: Clean profile with a soft clean cloth, or a brush with soft, antistatic bristles. A vacuum-cleaner brush may be used, provided its bristles are soft and perfectly clean.
STRUCTURE and ANCHORING BRACKETS:
STRUCTURE and ANCHORING BRACKETS:
STRUCTURE and ANCHORING BRACKETS:
STRUCTURE and ANCHORING BRACKETS:
The state of the product and the anchoring capacity of its brackets must be checked regularly. In case of canvas deformation or rips, or loosening of structural
components such as brackets or screws, action must be taken immediately to clear the area around the screen and avoid hazard to people and things, replace the defective component and restore the
product's functionality.
07
07
07
07 INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
WARNING:
WARNING:
WARNING:
WARNING:
When installing the screen use plugs and screws suitable for the screen’s weight and for the type of wall or ceiling on which the mount brackets are to be fixed, based on the
following criteria
Screen width up to c
Screen width up to c
Screen width up to c
Screen width up to cm
m
m
m
160
160
160
160
200
200
200
200
250
250
250
250
300
300
300
300
360
360
360
360
410
410
410
410
520
520
520
520
620
620
620
620
Overall weight
Overall weight
Overall weight
Overall weight
Kg 20
Kg 20
Kg 20
Kg 20
Kg 25
Kg 25
Kg 25
Kg 25
Kg 30
Kg 30
Kg 30
Kg 30
Kg 35
Kg 35
Kg 35
Kg 35
Kg 45
Kg 45
Kg 45
Kg 45
Kg 50
Kg 50
Kg 50
Kg 50
Kg 100
Kg 100
Kg 100
Kg 100
Kg 150
Kg 150
Kg 150
Kg 150
1. Prepare a hole for the screen as described in Fig. 1.
2. Install brackets as described in Fig. 2, adhering to distances given in Fig. 1.
3. Install screen as described in Fig. 3 to 7 of next page.
5. Finish installation by applying plugs as per Fig. 10 and 11.
