SCP SCIENCE DigiPREP HP, Руководство по обслуживанию

Страница: 19 / 49

KeyPad service manual
Rev.1.1 19
2.3 Digital Screen (LCD) is malfunctioning

Make sure that the voltage selector switch is set to the right
position (see figure 2)

With the system powered up, verify that the following message
is appearing for 5 seconds on the LCD screen:

If the startup message is not appearing or strange character are
displayed
o
Replace the LCD monitor

After 5 second, the user should see the following:

If not, remove the bottom plate by removing the 4 screws
holding the feet in place and verify that the LCD ribbon cable is
fully inserted into the U1 connector (see figure 8 for detail)
Figure 8: LCD display ribbon cable position
Legend:
1. U1, LCD ribbon Cable
If the LCD display is still not working, please refer to the CPU section before
changing the digital screen.
SCP SCIENCE
Digi PREP
MENU
OPERATION UTILITIES
1