Scout X10, Руководство по обслуживанию

Страница: 10 / 80

10 Service manual - X10
Safety
3. Safety
3.1. Personnel qualifications
Only service technicians that are trained and authorized by Scout Mobility BV are allowed
to do maintenance and repairs to the wheelchair.
Temporary employees and persons in training are only allowed to do the maintenance and
repairs to the wheelchair if they work under the supervision of an authorized service
technician.
3.2. Cautions and warning statements
Safety information
• Safety information is indicated with the warning symbol. Wherever possible, safety
information is provided in the relevant chapter.
Functionality
• After repairing, reprogramming or replacing parts, always check the functionality of the
entire wheelchair. Pay special attention to safety features such as slowdown driving or
drive inhibits when seat lift and tilt are both used.
Temperature
• Avoid physical contact with the wheelchair's motors at all times. Physical contact can
cause burns. Motors are continuously in motion during use and can reach high
temperatures. After use, the motors cool down slowly.
• If the wheelchair is not in use, make sure that it is not exposed to direct sunlight for
lengthy periods of time. Some parts of wheelchair, such as the seat, the back and the
armrest can become hot if they have been exposed to full sunlight for too long. This
may cause burns or allergic reactions to the skin.
Programming
• Programming should only be conducted by healthcare professionals with in-depth
knowledge of wheelchair control systems. Incorrect programming could result in an
unsafe set-up of the wheelchair for a user. Scout Mobility BV accepts no
responsibility for losses of any kind if the programming of the control system is
altered without authorization of Scout Mobility BV.
Seat adjustment factory settings
Scout Mobility BV will deliver a wheelchair with default factory settings. These settings
depend on the options ordered with the wheelchair. When a configuration is ordered that
causes interference, Scout Mobility BV applies modified settings.
Moving parts
• Contact with moving parts of the wheelchair should be avoided. Contact with moving
parts can result in serious physical injury or damage to the wheelchair. Pay attention to
the following parts:
•
Wheels (drive and castor)
• Powered tilt in space adjustment
• Powered Lift option
• Powered Recline back adjustment
• Powered leg rest(s)