Scout Boats 275 XSF Скачать руководство пользователя страница 60

Страница: 60 / 109

12.4 Operating Your Boat

TO REDUCE THE RISK OF A FIRE OR EXPLOSION,

DO NOT START THE ENGINE WHEN FUEL FUMES

ARE PRESENT. FUEL FUMES ARE DANGEROUS

AND HARMFUL TO YOUR HEALTH.

After Starting the Engines

• Visibly check the engines to be sure there are no apparent

water, fuel or oil leaks.

• Check the operation of the engine cooling systems.

• Check the engine gauges. Make sure they are reading

normally.

• Check the controls and steering for smooth and proper

operation.

• Make sure all lines, cables, anchors, etc. for securing a

boat are on board and in good condition. All lines should

be coiled, secured and off the decks when underway.

• Have a safe cruise and enjoy yourself.

Remember:

When you operate a boat, you accept the responsibility for the

boat, for the safety of passengers and for others out enjoying

the water.

• Avoid sea conditions that are beyond the skill and

experience of you and your crew.

• Alcohol and any drugs can severely reduce your reaction

time and affect your better judgment.

• Alcohol severely reduces the ability to react to several

different signals at once.

• Alcohol makes it difficult to correctly judge speed and

distance, or track moving objects.

• Alcohol reduces night vision, and the ability to

distinguish red from green.

YOU SHOULD NEVER OPERATE YOUR BOAT

WHILE UNDER THE INFLUENCE OF ALCOHOL

AND DRUGS.

MAKE SURE ONE OTHER PERSON ON THE

BOAT IS INSTRUCTED IN THE OPERATION OF

THE BOAT AND ALWAYS OPERATE THE BOAT IN

COMPLIANCE WITH ALL STATE AND LOCAL LAWS

GOVERNING THE USE OF A BOAT.

DO NOT OPERATE THE BOAT UNLESS IT

IS COMPLETELY ASSEMBLED. KEEP ALL

FASTENERS TIGHT. KEEP ADJUSTMENTS

ACCORDING TO SPECIFICATIONS.

Before operating the boat for the first time, read the engine

break-in procedures. The Yamaha break-in procedures are

found in the owner’s manual for the engine. The manual is in

the literature packet. Correct break-in operation is critical to

ensure proper performance and longer engine life.

FAILURE TO FOLLOW THE BREAK-IN PROCEDURE

MAY RESULT IN REDUCED ENGINE LIFE OR EVEN

SEVERE ENGINE DAMAGE IN YAMAHA ENGINE.

MAKE SURE YOU FOLLOW THE BREAK-IN

PROCEDURE EXACTLY.

As different types of engines are used to power the boat, have

the dealer describe the operating procedures for your boat. For

more instructions on “How To Operate The Boat,” make sure

you read the instructions given to you in the owner’s manual

for the engine you have selected.

Note: For more instructions on safety, equipment and

boat handling, enroll in one of the several free

boating courses offered. For information on the

courses offered in your area, call the “Boating

Safety Hotline,” 800-368-5647, or the “Boat U.S.

Foundation Course Hotline,” 1-800-336-2628, for

further information on boating safety courses.

Note: If the drive unit hits an underwater object, stop

the engines. Inspect the drive unit for damage.

If the unit is damaged, contact your dealer for a

complete inspection and repair of the unit.

To stop the boat, follow this procedure:

• Allow the engines to drop to the idle speed.

• Make sure the shifting levers are in the neutral position.

Содержание 275 XSF














































































































Результаты поиска

Содержание 275 XSF

Отзывы:

Похожие инструкции для 275 XSF

Бренды по названию

Популярные бренды

Scout Boats 275 XSF, Руководство пользователя

Результаты поиска

Содержание 275 XSF

Отзывы:

Похожие инструкции для 275 XSF

Бренды по названию

Популярные бренды