Scout Boats 275 XSF Скачать руководство пользователя страница 30

Страница: 30 / 109

Running Lights

The switch is a three-position switch. The middle position is

“OFF.” Moving the switch in one direction will activate the

navigation lights. Moving the switch in the opposite direction

activates the anchor light.

Interior Lights

Activates the lighting in the head compartment. Also activates

the light in the battery compartment which is located behind a

hatch in the head compartment. The light in the head can be

switched on and off with the switch on the light fixture once it

is activated by the interior light switch.

Courtesy Lights

Activates the lights that illuminate the cockpit and helm area.

12-Volt Receptacle

Provides electrical current for portable 12-volt equipment.

Aerator

Activates the livewell circulating pump that supplies water to

the standard livewell.

Livewell Light

Activates the lights in the livewell, the forward console cooler,

and the light in the optional leaning post livewell.

Leaning Post Recirculating Pump

Activates the livewell circulating pump that supplies water to

the optional leaning post livewell.

Leaning Post Aerator

Activates the livewell circulating pump that aerates the optional

leaning post livewell.

Washdown

Activates the raw or fresh water washdown pump. The pump

is the pressure demand type. The pressure switch automati-

cally controls the water pump when the system is activated

and properly primed.

Note: Please refer to the Fresh and Raw Water System

chapters for more information on the livewell and

washdown systems.

Accessory Switch (1)

This switch is supplied to protect additional equipment that

may have been installed by Scout or your Scout dealer. If no

accessories are activated by this switch, it remains wired in

the panel in reserve.

Additional DC Switch Panels

Trim Tab Switch

Located in the helm. This switch controls the trim tab planes

located on the transom of the boat. It is protected by a circuit

breaker located in the 12-volt helm switch panel. Please refer

to the Helm Control Systems chapter for detailed information

on the operation of the trim tab controls.

Hidaway Door Switch

Located in the helm. Opens and closes the electrically activated

panel that covers the instruments and electronics. It is protected

by a circuit breaker in the panel below the switch.

Engine Trim and Tilt Switches

Located in the helm. These switches may be installed in the

engine control handle or on the helm console, depending on

the engines or controls installed in your boat. They control the

trimming and tilting of the engines. Please refer to the Helm

Control Systems chapter and the engine owner’s manual for in-

formation regarding the proper use of the tilt and trim switches.

Windlass Switch (Optional)

Located in the helm. This switch controls the optional windlass

which is mounted to the deck directly above the rope locker. It

is protected by a circuit breaker of the type and rating recom-

mended by the windlass manufacturer that is located near the

battery switches.

Spreader Lights

Located on the side of the electronics locker. There are 2

switches. One switch activates the aft spreader light and one

switch activates the fwd spreader light.

Console Courtesy and Map Light

Located on the switch panel with the spreader light switches.

Moving the switch up activates the courtesy light over the

helm and moving the switch down activates the map light.

The switch is off in the center position.

Holding Tank Discharge

Activates the overboard diaphragm discharge system for the

holding tank and marine head.

Содержание 275 XSF














































































































Результаты поиска

Содержание 275 XSF

Отзывы:

Похожие инструкции для 275 XSF

Бренды по названию

Популярные бренды

Scout Boats 275 XSF, Руководство пользователя

Результаты поиска

Содержание 275 XSF

Отзывы:

Похожие инструкции для 275 XSF

Бренды по названию

Популярные бренды