Important Information
FV-40 Series Flame Detector
087-0056 REV F
v
Warning:
When the primary device is off line, ensure you have
another online device to actively detect flame. The device may be off line
due to such activities, like but not limited to, calibration, installation,
maintenance, troubleshooting, configuration, wiring and other activities.
Warning:
If the device does not function as described herein,
remove from service and mark for maintenance. Only use Scott Safety
replacement parts.
Warning:
Only use the device to monitor the zone for the flame
types for which it is set-up to detect.
Warning:
Verify the cover, internal PCB's and field wiring are
securely in place before applying power and operation.
Warning:
Do not expose the device to electrical shock or
continuous severe mechanical shock.
Warning:
Do not use the device if its enclosure is damaged,
cracked, or has missing components.
Warning:
Protect the device from dripping liquids and high power
sprays.
Warning:
Device will not operate without power applied. Thus, it
only detects flames while powered.
Warning:
Periodically test for correct operation of the system's
alarm events by exposing the device to a targeted flames above the high
alarm set point.
Warning:
Calibration is critical. Calibration should be performed
periodically that takes into account device use and environment conditions.
Calibrate with known flame simulators and check on a regular schedule.
