How To Operate The AutoIQ Controller
The AutoIQ Controller is a
microprocessor based device that
receives input from several sources
and switches various components on
and off.
Its manual control is thru the use of
the Push Button Control Switches
1.
Freeze Button.
Pushing and
releasing this button starts or restarts
the machine. The AutoIQ Controller
remembers what cycle it was last in
and returns to that cycle.
2.
Harvest Button:
Pushing and
releasing this button will cause the
machine to go directly to a Harvest
Cycle. Can be done from Freeze or
Off. The machine will switch Off at the
end of the Harvest cycle.
3.
Clean Button:
Pushing and
releasing this button will cause the
machine to only power the water
pump for circulation of ice machine
cleaner. After the ice machine
cleaner has circulated for about 10
minutes a second push of this button
will switch on the rinsing system to
flush out the dissolved scale and ice
machine cleaner.
4.
Off Button
: Pushing and releasing
this button will switch the machine
OFF at the end of the next cycle. If the
button is pushed and HELD for more
than 3 seconds, the unit will switch off
immediately.
To Reset:
First push and release the
Off button, then push and release the
Freeze button.
CME506R, 656R, 806R: AutoIQ Cubers
January 2000
Page 18
1
2
3
4
5
6
7
8
9
BIN FULL
FREEZE
HARVEST
CLEAN
OFF
WATER
REFRIGERATION
Push Buttons
Indicator Lights
Diagnostic Lights:
Содержание CME506R
Страница 42: ......
