SCOPE COMMUNICATIONS UK LTD
PAGETEK PRO MK2
Ref: PTPROMK2INSTALLred
Page
2
of 27
Issue 1
Installation
Installation must only be undertaken by an Approved contractor, who shall ensure that all
work is carried out in compliance with National Wiring Regulations and the relevant parts
of BS 5839-1: 2013. In all cases, installation may only take place after a full site survey
has been performed to the satisfaction of all parties. The installer shall issue Installation,
Commissioning and Acceptance certificates to the purchaser, for completion by the
Installer and (where applicable) the purchaser.
Liability
Scope does not accept liability for any damage or injury, howsoever caused as the result
of misuse of this equipment. It is the responsibility of the user to ensure that the equipment
is operated in the manner for which it was intended and that it is the correct item of
equipment for the required task.
Warranty
This product is warranted as free from defects of workmanship and materials for a period
of one year from the original purchase date. During this time, if there is a defect or
malfunction of this product, Scope will, with proof of purchase, repair or replace at it’s
discretion any defective parts, free of charge. This does not include where the
adjustments, parts and repair are necessary due to circumstances beyond the control of
Scope, including but not limited to fire or other casualty, accident, neglect, abuse,
abnormal use or battery leakage damage.
WARNING ! No User Serviceable Parts
Caution! Risk of electric shock, do not open.
Alteration or modification to any part of this equipment, without the prior written consent of
the manufacturer, will invalidate all manufacturer approvals and warranties. No
adjustments can be undertaken except by qualified and licensed persons as authorised by
Scope.
Hereby, the manufacturer Scope Communications UK Ltd declares that the radio equipment type:
Pagetek Pro MK2, PTPRO2,
is in compliance with Radio Equipment Directive 2014/53/EU and ROHS Directive 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet address:
www.scope-
uk.com/technical/doc/PTPRO.pdf
or from Scope at: Quantum House, Steamer Quay, Totnes, TQ9 5AL United Kingdom.
Do not discard. At end of life this equipment must be sent to an authorised waste treatment centre. Contact
Scope at the above address for further details.
© Scope Communications UK Ltd, 2017 All Rights Reserved
