SCOPE COMMUNICATIONS UK LTD
PAGETEK PRO MK2
Ref: PTPROMK2INSTALLred
Page
1
of 27
Issue 1
PREFACE
Important Installation Information
It is the purchasers’ responsibility to determine the suitability of this equipment and its
derivatives for any given application. To assist in this, a System Design certificate is
provided at the back of this manual (see Annex A), which declares the system’s intended
purpose, its compliance with specific standards, and lists any applicable variations.
This system must only be installed after a thorough site survey has been performed, and
only after the site survey report has been signed off to the satisfaction of both installer and
purchaser.
Good working practice dictates that a suitable system installation log must be generated,
together with a record of the dates when the system has been manually checked, (with the
aid of signal strength meters etc.) enabling the system performance to be compared with
the original installation data. The relevant data should be entered in the Log by the installer
both at time of installation and following any subsequent site visits.
The supply of this equipment is governed by our standard terms and conditions of sale,
which can be found on the reverse of all order acknowledgements*, pro forma invoices*,
delivery notes, price lists and invoices. Alternatively, these can be provided on request.
* Faxed pro forma invoices and quotations refer to “conditions available upon request”.
Important Safety Information
Scope products are designed to operate safely when installed and used according to
general safety practices. The following requirements should be observed at all times.
Do NOT subject this equipment to:
Severe Mechanical shock
Excessive humidity or moisture
Extremes of temperature
Corrosive liquids
This equipment is designed for indoor use, unless expressly stated otherwise, and must
not be used in classified Hazardous Areas, including areas containing explosive or
flammable vapours, unless express authorisation has been given in writing by the
manufacturer. If in doubt, consult your local product dealer for further information.
Only use a damp cloth for cleaning (not liquid or aerosol based cleaners), and ensure that
any power is removed from the unit prior to beginning the cleaning operation.
Opening of access doors and removal of covers from the equipment must only be
undertaken by authorised service personnel, who should ensure that power is isolated
prior to commencing any maintenance work.
