2.0 Packing List
|7
1
Setup and Operation Manual
Please consult the SliceScope Pro manual for items shipped specifically
for use with the SliceScope microscope.
2.2 Optional items
Part No.
Laser splitting module
Enables the laser beam to be split into two paths, for sharing one
source between two multiphoton microscopes.
MP-4500
Alignment Pack
Required to ensure correct alignment of the laser through the
Scientifica Scanhead for optimal system performance
CCD camera
Tube lens
IR card
Ground glass disc
Condenser arm (typically shipped with SliceScope)
Green LED illuminator with graticule
Projection lens with graticule
Iris
MP-4900
Launch optics, intensity control and shutter
Includes all relay optics to deliver the laser beam from the source into
the periscope optics. For use without Pockels cell control
Periscope optics
Motorised intensity control and beam dump
Table optics for beam steering
Power meter
Mechanical shutter
MP-4000
Launch optics and shutter
Includes all relay optics to deliver the laser beam from the source into
the periscope optics. For use with Pockels cell control
Periscope optics
Table optics for beam steering
Power meter
Mechanical shutter
MP-4400
Multiphoton workstation (for use with Pockels cell
control)
Data acquisition board, PC and interface rack to control the Scanhead
and image acquisition.
National Instruments 2090A BNC breakout box
National Instruments EP shielded cable (68-68 pin)
National Instruments EPM shielded cable (for
connecting Pockels cell to PCI-e board)
PC with monitor
National Instruments 6110 PCI-DAQ board
National Instruments PCIe-6321 board
Note:
both PCI boards are pre-installed into the PC
MP-4700
Multiphoton workstation
Data acquisition board, PC and interface rack to control the Scanhead
and image acquisition.
National Instruments 2090A BNC breakout box
National Instruments EP shielded cable (68-68 pin)
MP-4800
