![Scientific SME1202A Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/scientific/sme1202a/sme1202a_user-manual_1217328015.webp)
SME1202A
15
3)
Basic Operation
3.1 <MEAS DISP>
Touch the screen or press down [MEAS] and then the <MEAS DISP> page will be
displayed on the screen shown as figure 3-1.
BIN1
Figure 3-1 Measure Display
The following functions can be achieved by touching the related key in soft key area on
this page.
MEAS SETUP (enter into the measurement setup page)
SYSTEM SETUP (enter into the system setup page)
FILE SETUP (enter into the internal file setup page)
PICKOUT SETUP (enter into the pick out setup page)
START Save (the current measurement results will be saved to U-disk by pressing
this touch key. If there is no U-disk inserted in the interface, the measurement results
will not be saved; if there is U-disk, the touch key of START Save will change into
STOP Save and it will stop saving the data into U-disk by pressing the touch key of
STOP Save).
NOTE:
Be sure to press STOP Save to end saving after START Save. Otherwise, the data
may be lost.
The following test condition information will be displayed in measurement/condition
display zone on this page. These conditions (except the measurement internal resistance)
can be set on < MEAS SETUP> page.
MEAS STEP.