10
SME1202A
2)
Introduction to Front and Rear Panels
This chapter will describe the basic operation of SME1202A. Before using the instrument,
please read this chapter carefully.
2.1 Introduction to Front Panel
Figure 2-1 shows the front panel of SME1202A.
Figure 2-1 Front Panel
1) USB interface
HOST interface of USB
2) LCD and touch screen
480*272 dot-matrix, 24-bit, 4.3-inch TFT and touch LCD is used for measurement
setup and result display.
3) [MEAS]
Press [MEAS] to enter into the MEAS DISP page.
4) [FILE]
Press [FILE] to enter into the page of internal and external File Manage.
5) [SYSTEM]
Press [SYSTEM] to enter into the SYSTEM SETUP page.
6) [ENTER]
Press this key to terminate and store input data.
7) Test terminals (HV-), INPUT, GUARD
(HV-): voltage output terminal
INPUT: sampling input terminal
GUARD: ground shield terminal
8) [TEST]
When the trigger mode is set as MANU (manual), pressing this key can trigger the
instrument manually.
9) [DISCH.]
Press this key to make the instrument return to discharge state from test state.
10) Universal Arrow Keys
There are four arrow keys: up, down, left and right arrow keys.
