Hardware Installation
13
To use DC power
Important:
Be sure that all devices are powered down and disconnected from
AC power before you begin.
1. Insert one end of the supplied RJ-45 cable to the Ethernet port on the
DPW941.
2. Insert the other end of the RJ-45 cable to a computer, network hub, switch,
or router Ethernet port.
3. Connect the power adapter plug to the DC-IN socket on the DPW941.
4. Connect the DPW941 power adapter to a wall socket.
5. Connect the power adapter plug for your device into the DC-IN socket.
6. Connect the power adapter for your device into a wall socket.
LAN
LAN
LAN
LAN
Wall
Socket
Switch
DPW941
T11450
3
2
5
4
6
1
Note:
The example on this page shows connections using a switch. If you are
using another device, check the user’s guide for that device to locate the
appropriate connectors.